View Here : Tire Tread Penny Test
When performing the penny tire test, remember not only to check each tire, but to check various places around each tire. Pay special attention to areas that look the most worn. Even if parts of your tread are deeper than 2/32”, you should still replace the tire when any areas fail the penny test.
How to Tell if You Need New Tires? With this easy test, a penny can buy you peace of mind when it comes to your tires and safety. Place a penny head first into several tread grooves across the tire.
In most states, legal tire tread depth is 2/32 of an inch, which is the exact distance from the tip of Abe’s head to the edge of the penny. Keep in mind that even if your tires pass the Lincoln penny test, you may want to consider buying new tires before the 2/32” rule kicks in. Tires with low treads make hydroplaning on rain-soaked roads more likely and significantly reduce traction in snow.
Take a penny and place it between the tire tread blocks with Lincoln’s head upside down and facing you. If Lincoln's head is buried, your tires still have more than 2/32" of tread. Your tires need to be replaced if the head is visible.
One easy way is the penny test. Simply insert a penny into your tire's tread groove with Lincoln's head upside down and facing you. If you can see all of Lincoln's head, your tread depth is less than 2/32 inch and it's time to replace your tires.
The "penny test" tread depth check doesn't hold water. Yes, U.S. coins can be substituted as a tire tread depth gauge to measure the critical, final few 32nds of an inch of remaining tread depth. Yes, U.S. coins can be substituted as a tire tread depth gauge to measure the critical, final few 32nds of an inch of remaining tread depth.
Related Products: Minimum Tread Depth | Minimum Tire Tread Depth | Penny Test Check Your Tires During National Tire Safety Week …how much tread you have left on your tire can be checked by using the old tried and true method of sticking a penny with Lincoln's head upside down in the tread area.